EarthCoat ElectroKing Electrocleaning Concentrate Powder (2 lb Container)

ElectroKing is a versatile soak cleaner and electrocleaner for jewelry and industrial substrates. Mix the powder concentrate with water and clean by simple immersion or by electrocleaning with a rectifier. Effective on common shop soils and compatible with many metals used in jewelry fabrication and plating lines.

Key Features

• Dual-mode use: immersion soak or electrocleaning
• Economical powder concentrate—easy to make up and maintain
• Suitable for white metal, copper, brass, steel, silver, gold, bronze, nickel, and zinc
• Sold in a 2 lb (0.91 kg) container

Makeup & Operating Parameters

Basic Setup

1. Heat water to ~140 °F, then add the measured ElectroKing powder and stir until dissolved.
2. For electrocleaning, connect the work negative (–) and the stainless anode positive (+); clean 15–60 seconds at 2–6 V.
3. For soak cleaning without a rectifier, immerse parts 1–5 minutes at 140 °F.
4. Rinse thoroughly after cleaning and proceed to activation/plating. For activation, see Activator-T.

Notes / Safety

• Use in a well-ventilated area. Wear gloves, safety goggles, and an apron.
• Do not add powder to water heated above 140 °F (60 °C).
• Avoid prolonged skin contact. Do not mix with Activator-T below 100 °F (32 °C).

California Prop 65 Warning:
Cancer and Reproductive Harm. www.P65warnings.ca.gov.