Handle Only-Disc Cutter Set of 10-1/8" to 1-1/4"

Replacement Handle Only for 125.1790 Disc Cutter Set of 10-1/8" to 1-1/4"

We have had requests for stocking the replacement handle for our popular disc cutting set of 10 as they can be accidentally broken by a misdirected hammer blow.
 

This replacement handle may work on other similar disc cutters, but the fitting is not guaranteed.

How to use a disc cutter:

• Use a cutting lubricant, like Stay Sharp, to lubricate the cutting edges of the punch.
• Use a suitable mallet, never a nail driving hammer. We suggest brass mallets.
• Always support the opposite side of the cutter with a sheet of the same diameter metal that you are cutting. This will help keep the upper and lower parts of the disk cutter in alignment and help minimize material sticking in the disk cutter.
• Do not exceed the maximum thickness recommended for your disk cutter.
• Only cut soft non-ferrous metals like brass, copper, silver and gold.
• Make sure your cutting edges are down.
• To prevent rust, keep your disk cutter lubricated between use and store in a dry location

California Prop 65 Warning:
Cancer and Reproductive Harm. www.P65warnings.ca.gov.