Eurotool Hammer Handpiece

Standard No Duplex Spring Version.  Use with any key tip type flex shaft.  Key tip type flex shafts are the North American Standard.


The Eurotool hammer handpiece is supplied with a hardened tip. Tips are interchangeable with the Swiss-made Badeco hammer handpiece. 

The Eurotool hammer handpiece is not recommended for continuous professional use.

The Eurotool hammer handpiece is a reciprocating rather than rotary action handpiece. It is used primarily for stone setting but can also be used for texturing, most often with the pave point (diamond tip) accessory, Otto Frei part number 153.195. The diamond tip will produce a bright cut stippled effect. You can also use this handpiece with the Carbide Tip (HP10212 Otto Frei part number 134.301) for marking or inscribing hardened steel. Threads on these tips are 4-48 US thread, the same as the popular Badeco tips. Use at low speed only (0-5,000 rpm) and only use in forward rotation. The Eurotool hammer handpiece has a 1/32" stroke and its impact force can be adjusted from light to heavy by rotating the silver knurled adjusting ring. Requires periodic lubrication with Handpiece Lube, Otto Frei part number 134.343