Antilope jewelers sawblades are recognized around the world as one of the best jewelers sawblades you can buy. Antilope sawblades are consistently straight and true, extremely sharp and perfectly tempered. Made in Germany, their outstanding quality is the result of years of experience matched with the most modern production methods. 

149.500G  8/0 .15mm (.0063") thick-.33mm (.0126") wide-33 teeth per CM (84 teeth per inch)
149.501G  7/0 .18mm (.0067") thick-.36mm (.0130") wide-33 teeth per CM (84 teeth per inch)
149.502G  6/0 .18mm (.0070") thick-.36mm (.0140") wide-30 teeth per CM (76 teeth per inch)
149.503G  5/0 .20mm (.0080") thick-.41mm (.0157") wide-26 teeth per CM (66 teeth per inch)
149.504G  4/0 .23mm (.0086") thick-.43mm (.0175") wide-25 teeth per CM (66 teeth per inch)
149.505G  3/0 .25mm (.0095") thick-.48mm (.0190") wide-22 teeth per CM (61 teeth per inch) 
149.506G  2/0 .26mm (.0103") thick-.53mm (.0204") wide-21 teeth per CM (56 teeth per inch)
149.507G  1/0 .28mm (.0110") thick-.58mm (.0220") wide-20 teeth per CM (53 teeth per inch)
149.508G  #1  .30mm (.0120") thick-.64mm (.0240") wide-19 teeth per CM (51 teeth per inch)
149.510G  #2  .33mm (.0134") thick-.69mm (.0276") wide-17 teeth per CM (43 teeth per inch)
149.511G  #3  .36mm (.0150") thick-.74mm (.0290") wide-16 teeth per CM (40 teeth per inch)
149.512G  #4  .38mm (.0158") thick-.79mm (.0307") wide-15 teeth per CM (38 teeth per inch)
149.513G  #5  .41mm (.0140") thick-.84mm (.0331") wide-14 teeth per CM (35 teeth per inch)
 

The above numbers are sold in packs of 144 individual saw blades. We also sell these blades in packs of 12 individual saw blades (by the dozen). See link below.

When choosing the correct sawblade, a good rule of thumb is to have at least 3 teeth cutting at one time.

Drill Size for Piercing

8/0: #80 (Otto Frei HSS twist drill 128.580)

7/0: #80 (Otto Frei HSS twist drill 128.580)

6/0: #79 (Otto Frei HSS twist drill 128.579)

5/0: #78 (Otto Frei HSS twist drill 128.578)

4/0: #77 (Otto Frei HSS twist drill 128.577)

3/0: #76 (Otto Frei HSS twist drill 128.576)

2/0: #75 (Otto Frei HSS twist drill 128.575)

1/0: #73 (Otto Frei HSS twist drill 128.573)

#1: #71 (Otto Frei HSS twist drill 128.571)

#2: #70 (Otto Frei HSS twist drill 128.570)

#3: #68 (Otto Frei HSS twist drill 128.568)

#4: #67 (Otto Frei HSS twist drill 128.567)

#5: #65 (Otto Frei HSS twist drill 128.565)

#6: #58 (Otto Frei HSS twist drill 128.558)

#8: #55 (Otto Frei HSS twist drill 128.555)



 This is how the Niqua factory describes them:
The antelope blue saw blades were developed well over 100 years ago and thus belong to the first generation of jewelry saw blades. They are the original fretwork blades for goldsmiths and jewelers. They are often referred to as metal saw blades because their special hardness, positive cutting angle and pronounced round back make them suitable not only for sawing gold and silver alloys, but also for sawing hard metals through to stainless steel. The saw blades are hardened blue and bound by the dozen with silver wire.   

Warning: Cancer and Reproductive Harm www.P65warnings.ca.gov.