Handmade in France, these beautiful pin stems and joint combinations are the ultimate for your high end creations.  They are sold un-riveted, so you can disassemble them before you torch* solder the base.  If you laser them, you won't have to worry about destroying the spring tension when you solder.   The 2" (50 mm) 1.10 mm diameter pin stem is sold unfinished, so you can cut to any length and finish the point as you wish.

    *If using a torch to solder, pull the rivet, disassemble, and then solder the base to your piece. Reassemble then set the rivet.

Metal types:

• 46C-31  18K Yellow Base/18K White Pin stem 
• 46E-31  18K White Base & Pin stem

 

•  Length 2 inch, Wire Diameter 1.10 mm