Ottoflex No.20 Quick Change Handpiece

This is a 3/32" (2.35mm) collet lever style quick change flex shaft handpiece that fits on the popular USA standard key tip flex shafts.  This lever style quick change handpiece is based on the original Techno handpiece and has been made by many different manufacturers over the years including the Italians and the Swiss.  It is very similar to the Foredom No.20.  It's comfortable to use and lightweight with pre-lubriacted ball bearings that require no service. This quick change is made in China and is well made and relatively inexpensive.

Quick change handpieces have a fixed collet, in this case the popular 3/32" (2.35mm) collet.  Collet can be adjusted and replaced if necessary.  For longest collet life, keep collet clean and free from debris. 

You open the collet by pushing the lever in either direction so that it is 90 degrees in relationship to the body of the handpiece. To close the collet and secure your 3/32" diameter tool, move the lever back to so it is parallel to the body of the handpiece.

5-5/8" long 1-1/8" diameter at center, 3/8" diameter at tip.  Net Weight: 4 oz.