Durston 1302 Quad Jump Ringer 143.202:
The Durston Quad Jump Ringer is a jump ring making machine that is used with a Foredom No. 30 style handpiece and a flex shaft machine. With it you can mass produce jump rings from soft* non-ferrous jewelry wire like gold, copper and silver. The jump rings can be made with wire as thick as 13 gauge (1.85 mm). The inside diameter of the jump rings can be as small as 2.5 mm and as large as 12 mm. The outside diameter of your rings will vary depending on the wire diameter you use. The most popular sized wire for making jump rings used in the jewelry industry is anywhere from 0.8 mm to 1.0 mm.
The Quad Jump Ringer from Durston differs from the Complete Jump Ringer from Durston in a few ways. Number one, it is less expensive, as it does not have the stand and uses a simple vise or bench mounted hand coiler. Other than that, it has all the same mandrels (20) and uses the same handpiece holder and high speed steel saw blade. One big difference is the Quad Coil Holder, which is 4 sided, giving you more precise angles for holding particular sized jump rings.
Includes: 20 Mandrels
Mandrels Range from the smallest at 2.5 mm up to the largest at 12 mm in 1/2 mm sizes. The smallest mandrels, sizes 2.5 mm, 3 mm and 4 mm do are not drilled with holes. All other mandrels are drilled with holes.
- Durston 4-Sided Coil Holder
- 1-1/4" High Speed Steel Saw Blade
- Saw Blade Mandrel
- Durston Handpiece Holder
- Coil Winder with Keyless Chuck
- Durston Mandrel set of 20 from 2.5 mm to 12 mm with 1/2 sizes
The Durston Complete Jump Ringer is used with a Foredom No. 30 type Handpiece powered by a flex shaft machine. Flex shaft and handpiece sold separately.
*Not for use with platinum, titanium, steel or niobium wire.
Ottoflex S Flex Shaft Kit 134.220:
The new Ottoflex S Model 2 flex shaft is a top-quality choice for jewelers and crafts people looking for an alternative to higher priced models.
We finally found an import with a proven track record that we can trust with our name.
Compared to other value priced made in China flex shafts we have sold (under the Grobet USA, EuroTool and Glardon-Vallorbe brand names) the new Ottoflex S has a superior foot control and a better quality handpiece. The foot control gives good low speed control and offers a nice modulation in speed all the way up to full power. The fit and finish of the No. 30 style adjustable chuck handpiece is noticeably better than previous models. The sealed bearing motor is rated at 1/8 HP with a maximum speed of 20,000 RPM.
The Ottoflex S Model 2 has a one year warranty on the motor and 90 day warranty on the handpiece, shaft & sheath.
The Ottoflex S Model 2 flex shaft is compatible with all Foredom handpieces and 110V speed controls.
The new Ottoflex S Model 2 shares no parts with the original OttoFlex flex shafts. The shafts and sheaths of this flex shaft are similar to ones used on the Foredom SR model.
Features:
- 1/8 HP
- 20,000 RPM
- 110V/60Hz
- 2.6 Amps
- No. 30 Style Adjustable Chuck Handpiece with Key
- Plastic Foot Control
- North American 3-prong Plugs
- Motor Warranty: 12 Months
- Handpiece, Shaft Sheath Warranty: 3 Months
- Made in China
